Nuevo Venta! Resistencia SMOK TFV8 Baby Ver más grande

Resistencia SMOK TFV8 Baby, OSUB 80W

Nuevo producto

Resistencias para el TFV8 Baby Tank en las versiones abajo indicadas.

Para mayor sabor se recomienda la resistencia TFV8-M2

Precio por resistencia.

Más detalles

Al comprar este producto puede obtener hasta 39 Puntos de fidelidad. Total de su carrito 39 Puntos de fidelidad que se puede(n) transformar en un vale de descuento de MXN $ 3.90.


MXN $ 140.00

  • TFV8 Baby M2 @0.2Ω (25-45W)
  • TFV8 Baby X4 @0.15Ω (45-60W)
  • TFV8 Baby Q2 @0.4Ω (55-65W)
  • TFV8 Baby T6 @0.2Ω (70-90W)
  • TFV8 Baby T8 @0.15Ω (50-110W)
  • TFV8 Baby RBA Dual

Pagos en :
Pagos en :

Añadir a la lista de deseos

Más

TFV8 BABY BIG FAMILY

Specifications:

V8 Baby-T8 Core -

  • Deep and rich cloud taste
  • 0.15Ω octuple coils
  • Wattage range: 50W-110W
  • Recommended wattage: 60W-80W

V8 Baby-T6 Core -

  • Cool and smooth taste
  • 0.2Ω sextuple coils
  • Wattage range: 40W-130W
  • Recommended wattage: 70W-90W

V8 Baby-X4 Core -

  • Smooth and silky taste
  • 0.15Ω quadruple coils
  • Wattage range: 30W-70W
  • Recommended wattage: 45W-60W

V8 Baby-Q2 Core 0.4ohm -

  • Deep and rich cloud taste
  • 0.4Ω dual coils
  • Wattage range: 40W-80W
  • Recommended wattage: 55W-65W

V8 Baby-Q2 Core 0.6ohm -

  • Deep and rich cloud taste
  • 0.6Ω dual coils
  • Wattage range: 20W-50W
  • Recommended wattage: 30W-40W

V8 Baby RBA -

  • Two-post design with 2mm dual terminals
  • Dual 6mm x 3mm air slots
  • Quad 4.5mm x 2.5mm wicking ports
  • Pre-built dual Clapton coils with 0.3Ω resistance
  • Wattage range: 30W-60W
  • Recommended wattage: 50W

Match With Both The TFV8 Baby and TFV8 Big Baby

HOW TO BUILD THE RBA

1. Before starting make sure your hands are clean.
2. Taking RBA deck apart.

3. Installing and positioning the pre-wrapped coil. Place the coil between the posts and wrap the ends around the screws and tighten up, once all in place make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base.
4. Cutting the ends of wire off.

5. Cutting a strip of cotton and make sure it’s not too much and not too less.
6. Inserting the cotton, and placing it in the middle.
7. Cutting the cotton at an angle and make sure it’s not too short and not too long.

8. Wet the coil with your e-liquid and adjust the cotton.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically toensure the resistance remains the same.

Reseñas

No hay reseñas de clientes en este momento.

Escribe tu opinión

Resistencia SMOK TFV8 Baby, OSUB 80W

Resistencia SMOK TFV8 Baby, OSUB 80W

Resistencias para el TFV8 Baby Tank en las versiones abajo indicadas.

Para mayor sabor se recomienda la resistencia TFV8-M2

Precio por resistencia.

Los clientes que compraron este producto también han comprado...

30 productos más en la misma categoría: