CLOUD BEAST KING

The beast tank has grown to be unprecedented strong and wild, with a 27mm chest, The newest TFV12 Sub ohm tank is coming with the ever biggest & cloud-chasing coil heads: the V12-T12 (Twelve Coils) and V12-X4(quadruple coils) and V12-Q4 (quadruple coils), which definitely makes it to be the cloud beast king for the year 2017, Innovation keeps changing the vaping experience!

4 COLORS FOR YOU

SPECIFICATIONS

COMPONENTS

V12 ENGINE

KING’S SWORD

STAINLESS STEEL & GLASS MATERIAL

KING’S ARMOR

It is larger, stronger and crazier. The large size V12-T12, V12-X4 and V12-Q4 coil heads improve the efficiency of atomization, and compati ble with various mods with high output power. The powerful coil heads for the best tank, it is the sword from the king which makes anything possible.

LARGE CAPACITY

KING’S BROAD-MINDED

TFV12 features with large size and 6ml e-juice capacity, which can satisfy several times vaping. TFV12 is just like the true king that is capable with anything.

TFV12 VS TFV8

Comparing with TFV8, there is a 3.5mm increase in diameter and 30% increase in air slots area of TFV12; bigger inner diameter delrin drip tip for much more vapor, just have an open draw with the king’s experience.

SPECIAL GLASS MATERIAL DRIP TIP

（ OPTIONAL）

RESIN DRIP TIP

TOP REFILL SYSTEM

Top rotary refill design makes filling as easy as it gets. Leak proof e-liquid slot can significantly solve leaking problem.

SUPPORT SINGLE COIL BUILD

It supports single coil build when used with the silicone pad.

V12-RBA-T supports single coil build

RBA BUILDING

Before starting make sure your hands are clean.

Taking RBA apart.

Installing the pre-wrapped coil. 
Place the coil between the posts and wrap the ends around the screws and tighten up, once all in place make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base.

Position and cut the ends of wire off.

Cut a strip of cotton and make sure it's not too much, and not too little.

Insert the cotton, and place it in the middle

Cut the cotton at an angle. Make sure it’s not too short and not too long.

Wet the coil with your e-liquid and adjust the cotton.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.

RBA-T BUILDING

Before starting make sure your hands are clean.

Taking RBA-T apart.

Installing the pre-wrapped coil. 
Place the coil between the posts and wrap the ends around the screws and tighten up, once all in place make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base.

Position and cut the ends of wire off.

Cut a strip of cotton and make sure it's not too much, and not too little

Insert the cotton, and place it in the middle

Cut the cotton at an angle. Make sure it’s not too short and not too long.

Wet the coil with your e-liquid and adjust the cotton. 
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.