Smok Guardian III FULL KIT- Black Pipe

https://www.youtube.com/watch?v=L_xrhm6JDsY

GUARDIAN III KIT

The SMOK Guardian 3 kit is an extremely unique temperature control mod. The Guardian 3 Pipe Kit is a pipe style electronic cigarette that has a unique form factor. SMOK has been known for their breakthrough and extremely popular units, such as the Kooper Plus, TFV4, X-Cube 2, and the list goes on, so this new breakthrough should be no surprise.

The SMOK Guardian 3 Starter Kit includes one pipe mod and one TFV4 Micro Plus tank. The combination of these two mods will have you vaping like a sir in no time. The Guardian Pipe III rings in at 101.8*59.1*46.3mm and the Micro TFV4 Plus comes in at 24.5*51mm. This sleek and stylish combo of the G3 Pipe and the Micro TFV4 Plus will offer you one of the best vaping experiences possible.

The Guardian 3 Pipe by SMOK is a 75 watt device (1-75 watts) that is also loaded temperature control settings. The temperature control range on this device is 200-600 degrees Fahrenheit. This pipe mod supports Stainless steel, Ni200, and Titanium wire while operating in temperature control. This device was crafted with fireproof material, polycarbonate, and ABS Alloy to ensure its durability. This mod isn’t just your standard variable wattage/temperature control mod, it’s loaded with a bunch of bonus features.

OLED Display

The screen is one of the best features on the SMOK Pipe Mod. The large OLED screen is located on top of the mod, where the tobacco bowl would sit on a traditional pipe. One great feature with the OLED screen on this mod is the customizable aspect. If you wish to have the time displayed on your mod, you can choose that selection. If you prefer to have your current settings displayed, you also have that option. Prefer to have just the basic setting displayed? There’s an option for you! What about an active puff duration counter? You’re in luck, you can do that, too! The images below display the different options that you have in regards to your OLED settings.

Replaceable 18650 Battery

The pipe mod III from SMOK uses one 18650 battery (not included). One of the benefits of a replaceable 18650 battery is the fact that you can easily swap out the battery once the power starts decline, rather than having to sit and charge your internal battery device. The magnetic battery cover is located on the underside of the mod and it is attached by four powerful magnets. If you do not have an external battery charger, you can also charge this device with the included 510 battery charger.

Firmware Upgradable

Electronic cigarettes are getting more advanced every single day, so having the ability to update your device via firmware updates is a fantastic feature that all electronic cigarette companies should start implementing. The Guardian III firmware port is located discretely under the removable 18650 battery cover.

Micro TFV4 Plus

The tank included with Guardian 3 Pipe Kit is the Micro TFV4 Plus. The Micro TFV4 Plus is a 24.5mm 3.5ml/5ml version of the original TFV4. This starter kit comes with a conversion kit that will allow you to make your Micro Plus either a 3.5ml (standard) tank or a 5ml tank.

Bluetooth 4.0 Connectivity

The Guardian III Pipe mod has Bluetooth functionality built into it. The Bluetooth 4.0 module that is built into this mod will allow you to control all of the features directly from your smartphone. This feature can be extremely useful when you want to switch between operating modes without going through the menu system on the mod. You can also easily increase/decrease wattage settings with your smartphone. Curious about how often you vape? This mod has an active puff counter that will let you know your daily vaping stats.

SPECIFICATIONS

TEXTURED FINISH

COMFORTABLE TO HOLD

Guardian III kit with black piano lacquer finish shows low-profile, classic, and premium. And this compact and portable kit is comfortable to hold and very easy to use.

5.5ML REPLACEMENT

GLASS TUBE & EXTENSION ADAPTER

This kit includes a 5.5ml replacement glass tube and tank extension adapter so that you can enjoy Guardian III kit without having to refill as often.

510 RDA DRIP TIP

FOR TOTALLY NEW EXPERIENCE (NOT INCLUDED)

The 510 RDA drip tip with the V shape airflow channel will definitely create a totally different vaping experience that most people shall like. And its cone-like body looks pretty cool!

TOP REFILL SYSTEM

Top refill system makes filling as easy as it gets. Leak proof e-liquid slot can significantly solve leaking problem.

ADJUSTABLE AIRFLOW SYSTEM

Bring you an extremely open draw. Airflow can be adjusted freely by either turning the ring on the drip tip or the one at the base of atomizer

HOW TO FILL WITH E-LIQUID

MICRO SIZE

WITHOUT SACRIFICING PERFORMANCE

Micro TFV4, a special edition of the revolutionary TFV4 tank, is customized for Micro One. With two sub-ohm cores, 0.3Ω Micro CLP2 Core and 0.25Ω Micro STC2 Core, it will bring you unexpected taste and huge cloud.

THE MORE CHOICE FOR YOU

HOW TO BUILD THE RBA

( Micro R2 RBA core not included in this kit. Customers who desire it can purchase separately. )

Before starting make sure your hands are clean.

Before starting make sure your hands are clean.

Installing and positioning the pre-wrapped coil. 
Place the coil between the posts and wrap the ends around the screws and tighten up, once all in place make sure the coil is lined up with the air hole, and NOT touching the base.

Cutting a strip of cotton and make sure it's not too much and not too less.

Cutting a strip of cotton and make sure it's not too much and not too less.

Cutting the cotton at an angle and make sure it's not too short and not too long.

Wet the coil with your e-liquid and adjust the cotton.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.

INTELLIGENT

ALL CAN DO

Guardian Pipe III is the perfect combination of technology and style. It is the most powerful pipe mod of variable wattage up to 75w, and has fantastic functions like Bluetooth 4.0 with SMOK Smart BEC mobile application. Track your daily puff data. Feature accurate and intelligent Auto-Temperature Control. Support temperature control with Stainless Steel wire as well as Ni200 & Titanium. And with never go out of style, Guardian Pipe III deserves to be one of your vaping collections.

USER-FRIENDLY DESIGNS

Guardian Pipe III can show you current time and how long you draw.

GRAPHIC USER INTERFACE

The graphic user interface has been improved to be more simple and understandable to everyone.

FIREPROOF AND DURABLE

Constructed from fireproof material, Polycarbonate and ABS Alloy, Guardian Pipe III is pretty durable.

FIRMWARE UPGRADEABLE

With a USB port inside, customers can upgrade the pipe by self.

MAGNETIC BATTERY COVER

The magnetic battery cover design allows you to quickly replace battery without tools.

ADVANCED BLUETOOTH 4.0 TECHNOLOGY

With a built-in Bluetooth 4.0 module, Guardian PIPE III can be fully controlled by your Smartphone. Download the App and Have a Try!

SPECIFICATIONS

REPLACEABLE & RECHARGEABLE BATTERY DESIGN

Guardian Pipe III takes one 18650 battery (not included) that can be removed and replaced or recharged via 510 USB charger (included).

SS/NI200/TI WIRE SUPPORT

Guardian PIPE III can support temperature control with Stainless Steel wire as well as Nickel 200 & Titanium, and allow you to adjust their TCR (Temperature Coefficient of Resistance) in different ranges for further improving the accuracy of temperature control and bring you the best taste.

ADJUSTABLE INITIAL RESISTANCE

As temperature sensing coils tend to be sub-ohm, the poor contact problem can make a big error, in a way that is not evident when an atomizer is being used for wattage control only. This function is designed to ensure your resistance on the load remains the same. And its adjustable range is ±50 mΩ (± 0.05Ω).

GET CONNECTED WITH SMART BEC

Smart BEC, a mobile application that allows you to meet new friends, post photos, share messages and much more! Download the App and Get Connected Now!

It is applicable to Android 4.3+ and iOS 7.0+ systems.

TRACK YOUR DAILY PUFF DATA

The integrated puff counter can track your daily puff data, and also allow you to set the maximum numbers of vaping.

SPRING-LOADED 510 CENTER PIN

The spring-loaded pin will significantly improve the connectivity, for perfectly fits a variety of atomizers.

MULTIPLE PROTECTIONS

Guardian PIPE III provides multiple types of protections to safe guard against potential risk.