Tesla Stealth Kit @ 3.5 ml, 2,200 mah

The Teslacigs Stealth is a groundbreaking product geared towards both new and veteran vapers. It features a 2200mAh internal LiPo battery. This device outputs voltage based on resistance with a maximum output of 100W. The main feature of the Teslacigs Stealth is its ability hide tanks up to 22.5mm in diameter. This provides an easy to use stealth vaping setup. Other features include a ergonomically designed top fire button, and on-board USB charging.

The Teslacigs Stealth utilizes a 22.5mm diameter tank slot to hide tanks "under the surface". This makes the mod much easier to carry around throughout the day. It will accommodate most of sub tanks and RTAs that are currently on the market. Be prepared to experience the simplicity and portibility of the Stealth .

The Teslacigs Stealth is a very portable device. It comfortably fits into a pocket without the worry of auto firing. When compared to many other devices on the market, it is much shorter than the others. The stunning looks of the Stealth is largely due to its small size. 

The Teslacigs Stealth will support most atomizers up to 22.5mm without any problem. The device has been specifically designed to fit some of the most commonly used sub tanks on the market today. When paired with a top fill tank, filling becomes much easier than before.

The Teslacigs Stealth can also be used as a pass-through vaping device. When the battery is dead, the mod can be vaped while plugged in via micro USB. No more waiting for your battery to finish charging, just keep on vaping!

The rubberized finish on the Stealth makes holding it a comfortable experience. Never again worry about a mod being slippery enough to fall out of your hands. Along with this, the top fire button is slanted in order to make it easier to fire up the device.

The Teslacigs Stealth is powered by a 1 cell LiPo battery rated at 2200mAh,using LiPo battery is more security than lithium ion batteries. Additionally, the chipset has built-in protection features to keep you and your device safe. The amp limit on this device comes in at 40A, ensuring a safe vaping experience. 

The Teslacigs Stealth is compatible with most of low resistance coils. Feel free to blow huge clouds with this device,the device will fire down to .1 ohms. Just don't worry and keep vaping on.

The Teslacigs Stealth has multiple protections built into the chipset such as long puffing protection,overvoltage protection, low resistance protection, and charging protection . With these important features implemented into this device, users can feel safe every time they use this device.

The Teslacigs Stealth comes in two different packaging styles. The first is a mod only package that includes a stylish plastic stand to display the mod. And the starter kit package has two drawer compartments containing the mod, along with all of the extra parts. The body package simply includes the mod, along with a vertical stand to display the device.

The Tesla Stealth is a mod that features a submerged atomizer design, similar to the Smoant Knight V1.  Stealth mods have become quite popular because they are portable and can be safely placed in your pocket or purse. Tesla’s Stealth fits any 22mm tank and allows it to be stored inside the mod. It can also fire atomizers with low resistance up to 100W and features a long lasting 2200mAh battery.

With dimensions of 49.5mm x 70mm, the device is extremely portable and smaller than similar devices. It can be easily carried in the pocket without the possibility of accidental firing. The mod was constructed from zinc alloy with a durable rubber finish that is ergonomic and won’t slip from the hands. At the top of the device, the slanted fire button makes using the device a breeze.

The Tesla Stealth stealth can hide any tank or RDA that is 22.5mm in diameter or less. To install an atomizer, simply hold the top and bottom and rotate it into the tank slot’s 510 connection. If you use a top fill tank in combination with this setup, there’ll never even be a need to remove it.

This mod can put out up to 100W of power depending on output voltage. Voltage is indicated via the LED on the fire button. If voltage falls below 3.7V, a red indicating light will be present and if voltage is from 3.7V to 4.2V, you’ll see a blue light.  The unit can fire atomizers all the way down to 0.1Ω, so it should work with many of the newer tanks or builds.

The Stealth mod is powered by one internal 2200mAh internal LiPo battery which should allow for extended vaping, without a need to recharge. LiPo batteries are said to be safer than Lithium Ion ones and have a longer life. The mod is charged via its USB port and and has passthrough capability, so you can continue vaping while it’s plugged in.

The device also has multiple safety features built in. For safer vaping, the amperage is limited to 40A and the chipset was built with over-puff protection, high voltage protection and low resistance protection.

Overall, the Stealth Mod by Tesla looks like an excellent, portable stealth mod. While it does not feature variable wattage or temperature control, it is still  suitable for use by both beginner and seasoned vapers.

Performance of Stealth Starter Mod
There’s only a main fire button on this whole Stealth Starter Kit, no “＋”and “－”to adjust the wattage, which means, it comes with the same output mode as the mechanical or constant voltage vape pen kit and you don’t have to set up the parameters like wattage or functions. Actual laser output power all depends on the resistance of coil.

Performance of Shadow Tank
The package comes with two factory coil heads, a 0.28ohm SS316 Notch head is pre-installed, and a spare 0.6ohm head is included. Wattage ratings are modest: 20-60 watts for the 0.28 ohm head, and 20-50 watts for the 0.6 ohm.
For flavor and vapor production, with the pre-installed 0.28ohm SS316 coil head, the 50W max of the power rating produced a vape that was medium ample — warm with good flavor but not full vapor. When I vape another 0.6ohm coil, I have to turn down the airflow hole to make sure that I can vape the exact flavor, average for the standard of RDAs in same resistance.
Usually I can draw air for 2 seconds with RDA, but this Shadow Tank, I have to draw for 3-4 seconds. Though this 0.28ohm SS316 coil may have high heat productivity, you won’t feel over-temperature from tank. And juice filling is quite simple, just screw off the cap and you don’t have to take down the tank.