VAMO V7 Stainless Steel 30W

Vamo V7 Chrome

Stainless Steel Chrome Version

3-30 Watts

18350/18500/18650

The new Vamo V6 utilizes the popular V2 body style with an upgraded PCB and OLED screen as well as the ability to unscrew the top cap.

The Vamo V6 is a feature rich variable voltage and variable wattage mod. This V6 now features better metal buttons, a different battery spring and a new raised 510 connection.

In variable voltage mode, the mod can go from 3V to 6V in .1V increments.

In variable wattage mode, the mod can go from 3.0W to 20W in .5W increments.

It can work with 1pc 18650 battery, or 2pcs 18350 batteries, or 1pc 18350 battery.

Built in OLED display shows menu, function and selection.

Its maximum current output is 5A. It has reverse polarity protection. It can read the resistance to check atomizer/clearomizer/cartomizer.  It also features thermal monitoring, time limit protection, a bottom vent hole as well as a 510/eGo threading connector.

The Vamo v5 is compatible with 510 and eGo threaded atomizers/clearomizers/cartomizers.

It can be powered by either 1*18350 battery , 2*18350 batteries or 1*18650 battery

- 0.75" OLED display screen showing volts, watts, puffs, atomizer resistance, output current and vaping time
- Variable wattage - can be adjustable from 3.0W to 20.0W (in 0.5W increments)
- Short circuit protection
- Low load protection: Lower than 0.3 ohm when use 1 battery, Lower than 0.8 ohm when use 2 batteries; Lower than 5 ohm when use as a mobile power bank
- Maximum output current: 7A
- Over voltage (> 9V) and low voltage (< 3.4V) warning
- Vaping time setting: Auto & manual (5-30 seconds)
- Bottom vent hole
- 510/eGo threading connector (adjustable silver-plated-brass center pin)
- Removable beauty ring
- Works with atomizers with resistance >= 1.5 ohm
- Can be powered by 1*18650, 1*18350 or 2*18350 batteries (batteries sold separately)
- Vamo V6 cannot be recharged by a eGo battery charger, you should take out the battery to charge